π Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. This doesn't affect our editorial independence or the price you pay. Learn more
Best Portable Power Station for a Sump Pump (2027): How to Size One
A portable power station for a sump pump needs enough surge to start the motor and enough Wh to last a storm. Here's the math and 4 models that fit the job.
Black Friday 2026: Amazon's sale runs through Cyber Monday, November 30. See our picks worth watching
Disclosure: This post contains Amazon affiliate links (tag: pricerev-20). If you buy through them, we may earn a small commission at no extra cost to you. Links to brand websites are not affiliate links. This post is not sponsored.
Best Portable Power Station for a Sump Pump (2027): How to Size One
The Short Answer
A portable power station for a sump pump has to do two things: survive the motor's startup surge and hold enough watt-hours (Wh) to outlast the outage. For most basements with a 1/3 or 1/2 HP pump, the EcoFlow DELTA Pro 3 is the pick, because EcoFlow lists an 8,000W surge rating, 4,096Wh of capacity and a 10 ms UPS switchover. If you want more battery and 240V outlets for other circuits, the Anker SOLIX F3800 Plus is the alternative.
We did not test these units. Every number below comes from the manufacturers' spec pages or published sizing charts, linked at the end.
Step 1: Know What Your Pump Draws
Two numbers matter: running watts (what the pump uses once it's spinning) and starting watts (the short spike when the motor kicks on).
Published charts put typical pumps here:
| Pump size | Running watts | Starting watts | Source |
|---|---|---|---|
| 1/3 HP | 800W | 1,300W to 2,900W | Jackery sizing guide |
| 1/3 HP | 800W | 1,300W additional | EWEB generator sizing sheet |
| 1/2 HP | 1,050W | 2,150W | Lowe's generator wattage chart |
| 1/2 HP | 800W to 1,050W | 1,300W to 2,150W | Champion Power Equipment |
| 1/2 HP | 1,050W | 2,150W to 4,100W | Jackery sizing guide |
Your pump's nameplate is better than any chart. Zoeller, for example, lists its 1/2 HP Model M98 at 9.4 amps on 115V in its FM2779 technical data sheet, which works out to about 1,080 watts (amps times volts). Its 0.3 HP M53 is listed at 4.8 to 9.7 amps across the 115V and 230V versions. Neither Zoeller page lists starting (locked rotor) amps, which is why sizing charts pad the starting number so heavily.
Generac's sizing guide says motor starting wattage is "often two to three times the running figure." Bluetti's Apex 300 manual says motor devices "may start at 2-4 times their rated power." So for a 1/2 HP pump, plan for a start of roughly 2,100W to 4,200W.
Rule of thumb: pick a station whose surge (peak) rating clears your pump's worst-case start with room to spare, and whose continuous rating is well above the running watts.
Step 2: Do the Runtime Math
Runtime depends on how often the pump cycles, and that depends on the storm. A pump that runs nonstop drains a battery fast. One that runs 6 minutes an hour barely dents it.
Jackery's runtime formula is: hours = capacity in Wh x 0.85 / load in watts. The 0.85 accounts for conversion losses. We use the same factor for every brand below as a planning assumption, not a measured result.
Hours of runtime for a 1/2 HP pump drawing 1,050W while running:
| Station (capacity) | Pump runs nonstop | Runs 30 min/hr | Runs 15 min/hr | Runs 6 min/hr |
|---|---|---|---|---|
| EcoFlow DELTA Pro 3 (4,096Wh) | 3.3 hr | 6.6 hr | 13.3 hr | 33.2 hr |
| Anker SOLIX F3800 Plus (3,840Wh) | 3.1 hr | 6.2 hr | 12.4 hr | 31.1 hr |
| Bluetti Apex 300 (2,764.8Wh) | 2.2 hr | 4.5 hr | 9.0 hr | 22.4 hr |
| Jackery Explorer 2000 Plus (2,042.8Wh) | 1.7 hr | 3.3 hr | 6.6 hr | 16.5 hr |
For a 1/3 HP pump at 800W, multiply those hours by about 1.3. Jackery's own estimate for a 1/2 HP pump on its 2000 Plus is 1.6 hours of continuous running, which lines up with the table.
If you lose power for days during wet seasons, look at expansion batteries, solar input or a recharge plan, not just the base unit.
Quick Comparison
| Spec (per maker) | EcoFlow DELTA Pro 3 | Anker SOLIX F3800 Plus | Bluetti Apex 300 | Jackery Explorer 2000 Plus |
|---|---|---|---|---|
| Capacity | 4,096Wh | 3,840Wh | 2,764.8Wh | 2,042.8Wh |
| Continuous AC | 4,000W | 2,400W per standard outlet, 6,000W total | 3,840W | 3,000W |
| Surge | 8,000W | Not listed | Not listed | 6,000W |
| UPS switchover | 10 ms | 20 ms (wall outlet scenario) | 0 ms | 20 ms or less |
| 120V/240V | Both | Both | Both | 120V |
| Weight | 113.54 lb | 136.7 lb | about 83.8 lb | 61.5 lb |
| Chemistry | LFP | LFP | LiFePO4 | LiFePO4 |
| Warranty | 5 years | 5 years | 5 years (US) | 3 + 2 years |
EcoFlow DELTA Pro 3
Check EcoFlow DELTA Pro 3 on Amazon
The DELTA Pro 3 has the clearest numbers for a motor load. EcoFlow lists 4,000W continuous at 120/240V, 6,000W with X-Boost, and an 8,000W surge. That surge figure covers even the high end of the 1/2 HP starting range in the Jackery chart.
Capacity is 4,096Wh of LFP, rated for 4,000 cycles to 80%. UPS switchover is listed at 10 ms, so the pump stays powered from the station when the grid drops, without you being home to plug anything in.
For longer outages, EcoFlow says one unit expands to 12 kWh with two DP3 Extra Batteries. It also lists Smart Home Panel 2, an inlet box, a manual transfer switch and the Smart Generator 4000 (Dual Fuel) as add-ons. Solar input is up to 2,600W across two ports.
Watch out for: 113.54 lb is heavy to haul down basement stairs. EcoFlow's page listed the unit as sold out on Nov 20, 2026, with more expected in late January.
Anker SOLIX F3800 Plus
Check Anker SOLIX F3800 Plus on Amazon
The F3800 Plus is the bigger battery system. Anker lists 3,840Wh, expandable with up to six BP3800 batteries, and up to 53.8 kWh in a dual setup. Solar input tops out at 3,200W across two inputs.
For a sump pump, read the outlet limits closely. Anker lists the standard 120V outlets at 20A and 2,400W max, with 6,000W total available through the L14-30R 120/240V port. Anker's spec page does not list a surge figure. It also says only the three leftmost outlets support UPS, so the pump has to go on one of those. Switchover is listed at 20 ms in the wall-outlet scenario.
Watch out for: at 136.7 lb (with wheels) it's the heaviest pick here. Since Anker doesn't publish a surge rating, check the start draw on your pump's nameplate or ask Anker support before relying on it for a large pump.
Bluetti Apex 300
Check BLUETTI Apex 300 on Amazon
Bluetti lists the Apex 300 at 2,764.8Wh of LiFePO4 with 3,840W continuous output, 120V/240V split-phase, and a 0 ms UPS response time on its US product page. The Bluetti comparison page puts its weight at about 83.8 lb, which is easier to move than the two bigger units.
The catch for pumps: Bluetti doesn't list a separate surge rating on the pages we read. The 7,680W "lifting power" figure applies only to resistive loads, according to the manual. The same manual warns that motors can start at 2 to 4 times rated power and "could easily overload" the unit. A 1/3 HP pump is a comfortable fit. For a 1/2 HP pump, check the nameplate first.
Watch out for: the base unit was listed as out of stock on Bluetti's site on Nov 20, 2026.
Jackery Explorer 2000 Plus
Check Jackery Explorer 2000 Plus on Amazon
Jackery lists the Explorer 2000 Plus at 2,042.8Wh, 3,000W continuous and 6,000W surge peak, which handles a 1/2 HP pump's start on paper. Jackery says capacity expands from 2 kWh to 24 kWh with add-on battery packs. Its UPS guide lists the 2000 Plus at 20 ms or less.
This is the lightest pick at 61.5 lb, but also the smallest battery. On a heavy-rain night with the pump running 15 minutes an hour, the math above gives about 6.6 hours.
Watch out for: Jackery's own site now steers shoppers to the newer HomePower 2000 Plus v2, so check which version a listing is selling.
Safety: Do This Part Right
- Don't backfeed your panel. The Red Cross says never power house wiring by plugging a generator into a wall outlet, because backfeeding puts utility workers and neighbors at risk of electrocution. ESFI says transfer switches prevent backfeeding and "should only be installed by a qualified electrician." The same applies to a power station. Plug the pump directly into the station, or have a licensed electrician install the maker's panel or transfer switch.
- Use the right cord. The Red Cross recommends a heavy-duty, outdoor-rated extension cord with no cuts and all three prongs intact. A basement is a wet location, so keep the station and connections off the floor.
- If you add a gas generator for recharging, it goes outside. The Red Cross warns against running one in a home, garage, basement or crawlspace.
- Follow the manual. Your pump's and station's manuals, and local electrical code, win over anything here.
Who Should NOT Buy
- Anyone whose basement floods in a few minutes without the pump. A battery is a backup, not a guarantee. Talk to a plumber about a secondary or water-powered backup pump.
- Homes with long, frequent outages and no solar. A 2 kWh unit can run flat overnight in a big storm.
- People who need the pump on a hardwired circuit. That's an electrician's job, not a plug-in fix.
FAQ
Can a 2,000Wh power station run a 1/2 HP sump pump? On paper, yes, if the surge rating clears the start. Expect about 1.7 hours of nonstop running, or much longer if the pump cycles.
Can I recharge the station from a gas generator during a long outage? EcoFlow says the DELTA Pro 3 auto-recharges with its Smart Generator 4000 (Dual Fuel), and Anker lists a generator adapter for the F3800 Plus. Keep any gas generator outdoors.
Does UPS mode matter for a sump pump? Yes, for convenience. With the pump plugged into the station and the station plugged into the wall, it switches to battery automatically when the power drops.
How do I find my pump's starting watts? Look for locked rotor amps on the nameplate or data sheet. If it isn't listed, plan on 2 to 3 times the running watts, per Generac's guidance.
Sources
- EcoFlow DELTA Pro 3 product page
- Anker SOLIX F3800 Plus product page
- BLUETTI Apex 300 product page
- BLUETTI Apex 200 vs Apex 300 comparison
- BLUETTI Apex 300 user manual (PDF)
- Jackery: What can the 2000 Plus run
- Jackery: HomePower 2000 Plus v2 vs Explorer 2000 Plus vs Explorer 2000 v2
- Jackery: Which Jackery products have UPS mode
- Jackery: What size generator to run a sump pump
- Jackery: Can Jackery power a furnace (runtime formula)
- Zoeller Model 98 sump pump
- Zoeller Model 98 technical data sheet FM2779 (PDF)
- Zoeller Model M53 sump pump
- Lowe's portable generator wattage chart (PDF on lowes.com)
- EWEB generator sizing considerations (PDF)
- Champion Power Equipment: What size generator do I need
- Generac: What size generator do I need
- American Red Cross: Generator safety
- ESFI: Don't shock the neighborhood
Related Articles
EcoFlow DELTA Pro 3 vs Anker SOLIX F3800 Plus: Spec-by-Spec (2027)
EcoFlow DELTA Pro 3 vs Anker SOLIX F3800 Plus: DELTA Pro 3 wins on surge, weight and UPS speed. F3800 Plus wins on solar input and max expansion. Full specs.
Home & LivingHome Battery Backup Cost 2027: Plug-In Kits vs Powerwall vs Generators
Home battery backup cost for 2027: plug-in kits listed at $1,699 to $18,798, installed batteries about $13,000 to $18,500, standby generators $10K to $25K.
Home & LivingBest Home Battery Backup for an Apartment (2027): No-Install Picks for Renters
The best home battery backup for an apartment plugs in, needs no wiring and fits up the stairs. 4 LFP picks from 24.9 to 44.8 lb, plus balcony solar rules.
Fitness & OutdoorsWhatβs the Best Portable Power Station for a Weekend Camping Trip? (2026)
Best portable power station for a weekend camping trip? Jackery Explorer 300 β live $259, 292Wh not 300. Skip a $1000 EcoFlow. Phones and lights, not a fridge.
Home & LivingBest Power Strip Under $50 in 2026: Top Surge Protectors and USB Strips Compared
Compare the best power strips under $50 for surge protection, USB charging and long cords. See our top overall pick, best budget buy and desk favorite.
Home & LivingBest Rugged Portable SSD Under $100 for Video Backups? (2026 Honest Answer)
Best rugged portable SSD under $100 for video backups? The Samsung T7 Shield 1TB is the one to buy, but it costs well over $100. If $100 is a hard cap, the IP68 ADATA SD810 500GB is the honest exception.